Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In

 
Stainless Steel
Stainless Steel Coil at Samuel

Samuel, Son & Co., Limited is one of the largest processors and distributors of Stainless Steel products in North America, with facilities located coast to coast.

We stock one of the most extensive inventories in the industry. Please use the Request for Information button on this page to reach the representative in your area or to inquire about any Stainless Steel products not listed here -- more are available.

 
STAINLESS SHEET & COIL (FLAT ROLLED)​
Stainless Steel Sheet Coil Flat Rolled
Grade:
Austenitic 201, 301, 304, 304L, 309, 316, 316L, 321​
Ferritic​ 409, 409L, 410, 410S, 430, 434, 436, 439, 441, 444, 3CR12, 4003, 41003
Duplex LDX2101, 2003, 2205​​
Nickel Alloys 20, 200, 25-6HN, 400, 600, 601, 625, 800H, 800HT, 825 & C276​​
Thickness:​ 28 ga to 7 ga  (.016” - .187”)​
Finish: 2B, 2D, BA, #3, #4, Rolled-On​
Width: 30”, 36”, 42”, 48”, 60”, 72”​​
Length: 96”, 120”, 144”​
Processing: Cut-to-Length, Slitting, Blanking, Shearing​
back to top
 
STAINLESS PLATE (CMP, PMP, DISCRETE)
Stainless Plate CMP, PMP, Discrete
Grade:
Austenitic 304, 304H, 304L, 309S, 310S, 316H, 316L, 317L, 321, 321H, 904L, Alloy 20, 254SMO​
Ferritic 409, 410, 410S​
Duplex LDX2101, 2002, 2003, 2205, 2304, 2507​
Martensitic 17-4, 15-5
Nickel Alloys 200, 25-6HN, 400, 600, 601, 625, 800H, 800HT, 825 & C276​
Thickness:​ ​ 3/16” to 6”​
Width: 48” to 120”​
Length: 96” to 528”​
Processing: High Definition Plasma - Up to 5/8” Thk - Table Capacity 120”Wx390”L
Conventional Plasma - Up to 6” Thk - Table Capacity 132” Wx564” L
Water-Jet Cutting – Up to 6” Thk - Table Capacity 120” Wx360” L​
Value Added: Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing, Beveling​
back to top
 
STAINLESS ROUND BAR
Stainless Steel Round Bar
Size Range:​​ 1/8” – 20” dia.​​
Grade:
Austenitic 303, 304, 304L, 316, 316L, XM-19
Ferritic 416, 416 RQ, 416HT, 410, 410 QT, 410DQT, 431​
Duplex 2205, LDX2101​
Martensitic 17-4, 17-4 DH1150, 17-4 H1075, 17-4 H1050, 15-5​​
Nickel Alloys 400, 405, K500, 600, 601, 200, 201, 825, 625, 718, 800, 800HT, C276​
SAMUEL EXCLUSIVE!
ProMac™ Free Machining Bar – 303, 304, 304L, 316 & 316L​​
Finish: Cold Drawn, Cold Finished, Smooth Turned, Rough Turned, Hot Rolled, Centerless Ground, Turned Ground & Polished, Bearing Shaft Quality, Pump Shaft Quality​
Processing: Cutting up to 20” dia
Centerless Grinding 1/16” to 11 ½” dia
Turning –  to 12”
Straightening – to 8”
Chamfering – ¼” to 1 ½” dia
Polishing – to 12” dia
back to top
 
STAINLESS FLAT BAR
Stainless Steel Flat Bar
Processed (A240)
Size Range: 1/8” x ½” up to ¾” x 8”​
Grade:
Austenitic 304, 304L, 316, 316L​
Length: Up to 20 FT​
True Bar / HRAP (A276)​​
Size Range: 3/16” x ¾” up to 4” x 8”​
Grade:
Austenitic 303, 304, 304L, 316, 316L, 321, 347
Ferritic 410, 416, 420, 440C​
Martensitic 17-4
Length: Up to 20 FT​
back to top
 
STAINLESS ANGLE​​
Stainless Steel Angle
Equal Leg​
Size: ¾” x ¾” x 1/8” up to 6” x 6” x ½”​
Grade:
Austenitic 304L, 316L​
Finish: ​HRAP
Production: HRAP, Laser Fused
Unequal Leg​
Thickness: 3/16” to ½”​
Leg: 2” – 9” Wide​
Grade:
Austenitic   304L, 316L​
Finish: ​HRAP
Production: HRAP, Laser Fused

Non-standard sizes, lengths and grades available upon request​

back to top
 
STAINLESS SQUARE​​
Stainless Steel Square
Size: 3/16” – 3”​
Grade:
Austenitic 303, 304, 304L, 316, 316L​
Finish: Cold Drawn, Hot Rolled​
back to top
 
STAINLESS HEX​
Stainless Steel Hex
Size: 3/16” – 3”​
Grade:
Austenitic 303, 304, 304L, 316, 316L​
Finish:
Cold Drawn​
back to top
 
STAINLESS PIPE​
Stainless Steel Pipe
Welded & Seamless​​​
Size Range: ¼" thru 96”​
Schedule: 5 thru XXH​
Grade:
Austenitic 304, 304L, 316, 316L, 317L, 321, 347​
Ferritic 410​
Duplex LDX2101, 2205, 2507, 254SMO​
Nickel Alloys 20, 200, 400, 600, 625, 800H, 800HT, 825​
Finish: HRAP, CDA, BA, Polished​
back to top
 
STAINLESS TUBE​
Stainless Steel Tube
Welded & Seamless
Round
OD:​ ​ 1/8” – 12”​
Wall:​ ​ .035” -.500”​
Finish: 2B / #1 (HRAP) , CDA, BA, 180 Grit, Polish & Buffed, Sanitary​
Grade:
Austenitic 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 347​
Ferritic 410​
Duplex LDX2101, 2205, 2507, 254SMO​
Nickel Alloys 20, 200, 400, 600, 625, 800H, 800HT, 825​
Square​
Size:​ ​ ¾” – 12”​
Wall:​ ​ .035” - .500”​
Finish: 2B / #1 (HRAP) , CDA, BA, 180 Grit, Polish & Buffed, Sanitary​
Grade:
Austenitic 304, 304L, 316, 316L​
Rectangular
Size:​ ​ 1/2” x 1” -  6” x 10”​
Wall:​​ .035” - .500”​
Finish: 2B / #1 (HRAP) , CDA, BA, 180 Grit, Polish & Buffed, Sanitary​
Grade:
Austenitic 304, 304L, 316, 316L​
back to top
 
STAINLESS FITTINGS​
Stainless Steel Fitting
Pressure: 150#, 1M#, 3M#, 6M# Fittings (Threaded & Socket-Weld), 90’s, 45’s, Tees, Bushings, Couplings, Street Elbows, Unions, etc.​​
Buttweld: Sch5 thru XXH, LR/SR 90’s, 45’s, Tees, Concentric/Eccentric Reducers, Wyes, etc.​
Flanges:​​ 150# thru 1500# as well as Plate Flanges, Blinds, Socket-Weld, Slip-Ons, Weld-Necks, Threaded, Lap Joints​
Nipples,
O-Lets, etc:

On Inquiry​

Grade:
Austenitic 304, 304L, 316, 316L, 317L, 321, 347​
Ferritic 410​
Duplex LDX2101, 2205, 2507, 254SMO​
Nickel Alloys 20, 200, 400, 600, 625, 800H, 800HT, 825​
back to top
 
STAINLESS TEES​
Stainless Steel Pipe
Size: ¾” x ¾” x 1/8” to 2 ½” x 2 ½” x ¼”​​
Thickness: 1/8” to ¼”​​
Grade:
Austenitic 304L, 316L​
Finish: ​HRAP
Production: HRAP, Laser Fused
back to top
 
 

Samuel Stainless Steel • 1-800-267-2683

samuelplate@samuel.compipetube@samuel.comsamuelbar@samuel.com

General Inquiries: sales@samuel.com



© Samuel, Son & Co., Limited


Follow us