Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In

 
Carbon Steel - Flat Rolled
Carbon steel coils and Flat Rolled products

Samuel, Son & Co., Limited is one of the largest processors and distributors of Flat Rolled Steel products in North America, with facilities located coast to coast.

We stock one of the most extensive inventories in the industry. Please use the Request for Information button on this page to reach the representative in your area or to inquire about any Flat Rolled products not listed here -- more are available.

 
  HOT ROLLED CARBON STEEL​
Hot Rolled product is produced from continuously cast slabs capable of meeting customer specifications and chemical compositions. Hot Rolled products are available in low carbon, high strength low alloy, structural, high carbon and alloy grades. Product can be ordered to minimum or nominal thicknesses.
Hot Rolled Carbon Steel
Specification: ASTM, ASME, SAE, CSA​
Grade: HSLA, A36, 44W, 50W, CS TYPES A, B OR C, DRAWING STEEL (DS), DEEP DRAWING STEEL (DDS), STRUCTURAL STEELS (SS Grade 33,36,40,50), CORTEN, PRESSURE VESSEL QUALITY (PVQ), TUBING GRADES, FLOOR PLATE
Thickness: ​.054 to .625
Width: Up to 84"


​ ​​ HOT ROLLED PICKLED & OILED
Hot Rolled product is produced from continuously cast slabs capable of meeting customer specifications and chemical compositions. Hot Rolled products are available in low carbon, high strength low alloy, structural, high carbon and alloy grades. The Pickling treatment is applied to the surface to clean and remove scale, then Oil is applied to protect the surface of the strip from oxidation.
Hot Rolled Pickled Oiled Steel
Specification: ASTM, ASME, SAE, CSA​
Grade: HSLA, A36, 44W, 50W, CS TYPES A, B OR C, DRAWING STEEL (DS), DEEP DRAWING STEEL (DDS), STRUCTURAL STEELS (SS Grade 33,36,40,50), CORTEN, PRESSURE VESSEL QUALITY (PVQ), TUBING GRADES, FLOOR PLATE
Thickness: ​​.054 to .625 ​
Width: Up to 84"​
​  COLD ROLLED CARBON STEEL​
Cold Rolled product is produced from hot rolled processed sheet on tandem cold reduction mills to the desired customer thickness. The annealing process is capable of producing drawing steel, deep drawing and extra deep drawing steel. Product can be ordered to minimum or nominal thicknesses.​
Cold rolled carbon steel
Specification​: ASTM, ASME, SAE​
Grade: ​HSLA, CS TYPES A, B OR C, DRAWING STEEL (DS), DEEP DRAWING STEEL (DDS), EXTRA DEEP DRAWING STEEL (EDDS), STRUCTURAL STEELS (SS Grade 33)
Thickness: ​.010 to .135
Width: Up to 72"
 
  GALVANIZED CARBON STEEL​
Galvanized product is produced by passing hot rolled or cold rolled product through a molten bath of zinc. The galvanized product provides a barrier or protection against oxidation. The galvanized product can be tempered for extra smooth surface, chemically treated, phosphate coated, or painted. Product can be ordered to minimum or nominal thicknesses.​
Galvanized Carbon Steel
Specification: ​ASTM
Grade: CS TYPES A,B OR C, FORMING STEEL (FS), DEEP DRAWING STEEL (DDS), EXTRA DEEP DRAWING STEEL (EDDS), STRUCTURAL STEELS (SS Grade 33,37,40,50,80), HSLA (Grade 40,50,55,80)​
Thickness: ​.008 to .160
Width: ​Up to 72"
Coating: ​G30 to G235, 60G to 98G
 
  GALVANNEALED CARBON STEEL​
Galvannealed product is produced by passing cold rolled product through a molten bath of iron-zinc alloy. The galvannealed surface is suitable for exposed and semi-exposed applications and is frequently painted before or after fabrication. Product can be ordered to minimum or nominal thicknesses.​
Galvannealed Carbon Steel​​
Specification: ​ASTM
Grade: CS TYPES A,B OR C, FORMING STEEL (FS), DEEP DRAWING STEEL (DDS), EXTRA DEEP DRAWING STEEL (EDDS), HSLA (Grade 40,50,55,80)​
Thickness: ​.015 to .135
Width: ​Up to 72"
Coating: ​A40 to A60, ZF001 to ZF120
 
  GALVALUME CARBON STEEL​
Galvalume product is an aluminum-zinc alloy coated steel with enhanced corrosion protection. The product is produced with a continuous hot-dip process resulting in approximately 55% aluminum, 43.4% zinc and 1.6% silicon by weight. The product offers both corrosion and heat resistance. Product can be ordered to minimum or nominal thicknesses.
Galvalume carbon steel
Specification: ​ASTM
Grade:
CS TYPES A,B OR C, FORMING STEEL (FS)
Thickness: ​.015 to .078
Width: ​Up to 48"
Coating: ​AZ100 to AZ180
 
  ELECTROGALV CARBON STEEL​
Electrogalv product is produced from Cold Rolled sheet steel that is electrolytically coated with zinc or zinc-alloy. Electrogalv product is available in coating weights up to 100 grams / square meter per side. Product can be ordered to minimum or nominal thicknesses.​
Electrogalv carbon steel
Specification: ​ASTM
Grade: CS TYPES A,B OR C, DRAWING STEEL (DS), DEEP DRAWING STEEL (DDS), EXTRA DEEP DRAWING STEEL (EDDS), STRUCTURAL STEEL (SS Grade 35,37,40), HSLA​
Thickness: ​.022 to .060
Width: ​Up to 60"
Coating: ​50 to 98 g/m2
 
  ALUMINIZED CARBON STEEL​
Aluminized product is hot dipped coated on both sides with aluminum-silicon alloy. This product assures a metallurgical bond between the steel sheet and the aluminum coating. Aluminized steel offers protection against corrosion and keeps the properties of the base material steel for temperatures lower than 800 degrees C. Commonly used for heat exchangers in residential furnaces, mufflers, ovens and ranges, water heaters, fireplaces, bar-b-que burners and baking pans.​
Aluminized carbon steel
Specification: ​ASTM
Grade: COMMERCIAL STEEL (CS), FORMING STEEL (FS), DEEP DRAWING STEEL (DDS), EXTRA DEEP DRAWING STEEL (EDDS), STRUCTURAL STEEL (SS Grade 33,37,40,50), HSLA​
Thickness: ​.015 to .130
Width: ​Up to 48"
Coating: T125, T140​
 
   TIN MILL PRODUCTS​
Electrolytic Tinplate is black plate coated with tin by electrodeposition. Tin mill products are available as both single reduced and double reduced. Single reduced product is generally produced in .0149 inches and lighter, while the double reduced product is made in .0110 inches and lighter. Tinplate products can be produced with various coating weights​.
Tin plate metal
Specification: ​ASTM
Grade:
BA, CA, SR T1, T2, T3, T4 T5, DR​
Thickness: ​50# to 135# (.006 to .015)
Width: ​Up to 40"
Coating Weight: ​.10 to .50
 
 
   PREPAINTED CARBON STEEL​
Prepainted steel is produced from Cold Rolled, Galvanized, Galvannealed , Galvalume or Tin Mill products. The coatings are organic and organic based and are applied continuously. Customers can choose from various colors and paint systems.  View our Prepainted Color Chart for more information.​
Carbon Steel Prepainted​​
Specification:
CS TYPES A,B OR C, FORMING STEEL (FS), DRAWING STEEL (DS), STRUCTURAL STEELS (SS Grade 33,37,40,50,80)
Thickness: ​.008 to .160
Width: ​Up to 60"
Coating: G30 to G60, ZF001
Colors: White White, Bone White, Surf White, Bright White, Regent Grey, Stone Grey, Charcoal Grey, Metro Brown, Coffee Brown, Dark Brown, Black, Tan, Antique Linen, Gold, Sapphire Blue, Slate Blue, Heron Blue, Royal Blue, Bright Red, Dark Red, Tile Red, Melchers Green, Forest Green, Mist Green, Pacific Turquoise​
Click here for our complete color chart of prepainted metals​
Paint Systems: HDP, SMP, MVP​
Substrate: ​COLD ROLLED & GALVANIZED, GALVANNEAL, GALVALUME, ELECTRO GALVANIZED
 
   STRIP STEEL​
Strip Steel is produced from a hot rolled pickled strip. The coil is then reduced at a cold rolled steel mill to its final thickness. The final product typically consists of cold rolled steel that has been cut into specific widths,  frequently interleaved with paper or other material which protects the surface finish. The product is often later stamped to form a part from the strip steel.​
Carbon Strip Steel
Specification: ​ASTM-SAE
Grade:
Low Carbon 1006-1020, High Carbon 1035-1075 Alloy 4130-4140 Full Hard, spheroidized anneal, intermediate tempers, drawing quality, and restricted Rockwell ranges.
Custom finishes including bright, light matte, and plating quality
Thickness: ​.015 to .187
Width: ​Up to 60"
 
Samuel Carbon Group    sales@samuel.com    1-800-272-6835


© Samuel, Son & Co., Limited


Follow us